 Tetraflon offers a great line of virgin or filled PTFE plates and sheets, which go from .003” up to 10.1mm(4”) in thickness.
Widths:
305mm (12 ”) x 305mm (12”)
610mm (24”) x 619mm (24”)
914mm (36”) x 914mm (36”)
1220mm (48”) x 1220mm (48”)
It can also be offered in rolls and tapes. Tetraflon offers the manufacturing of PTFE pieces with a +/-.001 precision, according to a plane or physical sample. |
Thickness
Fraction |
Decimal
Inches |
Approximate weight (pounds) |
| 24" X 24" |
48" X 48" |
60" X 60" |
 |
.003" |
* |
* |
|
|
.004" |
* |
* |
|
|
.005" |
* |
* |
|
|
.008" |
* |
* |
|
|
.010" |
0,210 |
0,841 |
|
| 1/64" |
.0156" |
0,328 |
1,310 |
2,046 |
| 1/32" |
.0312" |
0,656 |
2,625 |
4,101 |
| 1/16" |
.0625" |
1,313 |
5,250 |
8,205* |
| 3/32" |
.0937" |
1,970 |
7,880 |
12,312 |
| 1/8" |
.1250" |
2,625 |
10,500 |
16,410 |
| 3/16" |
.1875" |
3,938 |
15,750 |
24,610 |
| 1/4" |
.2500" |
5,250 |
21,000 |
32,812 |
| 5/16" |
.3125" |
8,203 |
32,810 |
51,265 |
| 3/8"3/8" |
.3750" |
9,845 |
39,380 |
61,530 |
| 1/2" |
.5000" |
10,500 |
42,000 |
|
| 5/8" |
.6250" |
13,125 |
52,50 |
|
| 3/4" |
.7500" |
15,750 |
63,000 |
|
| 1" |
1.000" |
21,000 |
84,000 |
|
| 1-1/4" |
1.250" |
26,250 |
105,000 |
|
| 1-1/2" |
1.500" |
31,500 |
126,000 |
|
| 1-3/4" |
1.750" |
36,750 |
147,000 |
|
| 2" |
2.000" |
42,000 |
168,000 |
|
| 3" |
3.000" |
63,000 |
252,000 |
|
| 4" |
4.000" |
84,000 |
336,000 |
|
| *call for quotation |
PTFE plates are made to standard measurements of 48” and 24” width. Most common thicknesses are:
THICKNESS
|
INCHES |
WIDTHS |
| 1/64" |
.015" |
24", 48" |
| 1/32" |
.031" |
24", 48" |
| 1/16" |
.062" |
24", 48", 60" |
| 3/32" |
.0937" |
24", 48" |
| 1/8" |
.125" |
24; 48", 60" |
| 3/16" |
.1875" |
24", 48" |
| 1/8" |
.125" |
24; 48", 60" |
| 3/16" |
.1875" |
24", 48" |
| 1/4" |
.250" |
24", 48" |
| 3/8" |
.375" |
24", 48" |
It is important to mention that these can be offered of a 48” (122cm) width and in rolls.
For example: we can provide a roll that is 1/8”thick x 48” wide x 35m long.
In the case of sheets that are over ¼”, these can be molded and are 24”x 24” or 48” x 48”.
We can make mineral -filled sheets, over a ¼” thickness.
|
